| Power supply | 9-30V DC ±10% |
| Inputs | 2 0-10V or digital inputs 1 serial 1-wire input |
| Outputs | 2 potential-free outputs |
| Supported digital sensors | 6 DS18B20 or 1 DHT22 |
| Maximum current on outputs | 150mA |
| Maximum voltage on outputs | 30V DC / 20V AC ±5% |
| Built-in temperature sensor measurement range | -55°C–126°C (-67°F–259°F) |
| Operating temperature | 0–40°C (32–104°F) |
| Radio protocol | Z-Wave (500 series chip) |
| Radio frequency | 868.4 or 869.8 MHz EU; 908.4, 908.42 or 916.0 MHz US; 921.4 or 919.8 MHz ANZ; 869.0 MHz RU; |
| Radio ransmit power | max. 7 dBm (EIRP) |
| Range | up to 50m (164 ft) outdoors up to 40m (131 ft) indoors (depending on terrain and building structure) |
| Dimensions (Length x Width x Height) |
29 x 18 x 13 mm (1.14” x 0.71” x 0.51”) |
| Compliance with EU directives | RoHS 2011/65/EU RED 2014/53/EU |
FIBARO Smart Implant
FGBS-222
FIBARO Smart Implant allows to enhance the functionality of wired sensors and other devices by adding Z-Wave network communication. You can connect binary sensors, analog sensors, DS18B20 temperature sensors or DHT22 humidity and temperature sensor to report their readings to the Z-Wave controller. It can also control devices by opening/closing output contacts independently of the inputs.
Features
- Compatible with any certified Z-Wave or Z-Wave Plus controller,
- Supports Z-Wave network Security Modes: S0 with AES-128 encryption and S2 Authenticated with PRNG-based encryption,
- Works as a Z-Wave signal repeater,
- Allows for connecting sensors:
- 6 DS18B20 sensors,
- 1 DHT sensor,
- 2 2-wire analog sensor,
- 2 3-wire analog sensor,
- 2 binary sensors,
- Built-in temperature sensor.
| Brand | FIBARO |
|---|
